problems with product layout

[Landgreen]

Im having severe problems with my product layout. As you can see here: http://shop11.ipeurope.dk/acatalog/Primo.html it is very very left aligned. As far as i can see the problem is that the cell containing the product image isnt properly defined. Should be for example 25%. Whenever i change any layout options in actinic, it doesnt affect anything.
That really freaks me out...
I've attached my act_productline, hope some wizkid out there can tell me what's wrong.

[kathynewman]

I presume your table has just 2 columns? (the table was not shown in the file you attached)

If so what is the width of the second column - the one that contains the product information. Have you given that column a width?

If you try and change the width of the column that contains the image, and it's width added to the width of the 2nd column total more than 100% then it won't change the width of the 1st column

I would suggest you define thave the first column as 25% and second 75% (or any other %'s so long as the 2 add up to no more than 100%) and that should sort it out.

Hope that makes sense!

Kathy

[cdicken]

You could also put a line in Act_ProductBody.html to fix the width of the three columns in the product table at being 33% each.

You would put this line just above NETQUOTEVAR:PRODUCTBULK.

[Landgreen]

thx both of you.

I sorted it out by playing a little with the act_productline.html - some of the cells had some really weird values...