G.W.Green
27-May-2011, 11:36 AM
http://community.actinic.com/attachment.php?attachmentid=5275&stc=1&d=1323770023
Please see below instructions to configure the Toshiba ST-B10 to work with Actinic EPOS.
If you find that the printer, pole display or cash drawer stop working on the Toshiba ST-B10 for any reason, these instructions will show you how to configure the Toshiba ST-B10 from the beginning and solve the problem.
To Configure the Customer Display, Printer and Cash Drawer
Go to Start | Control Panel | Add/remove programs.
Click on "ST-B10 OPOS", then click "remove", then select "yes" to unistall the program.
http://community.actinic.com/attachment.php?attachmentid=4974&stc=1&d=1306494937
Restart you PC (Start | Shut down | Restart)
Now you need to reinstall the drivers.
Double click on "My Computer", then browse to the following location:
C:\Drivers\POSDRV\OPOS
Double click on "ST-B10_OPOS_Installer_V001.902.exe"
Select "Next"
Select "Execute" and click "Next".
http://community.actinic.com/attachment.php?attachmentid=4975&stc=1&d=1306494937
Click "Next", then "Install", then finally "Finish".
Go to Start | Settings | Control Panel | Tec POS Drivers.
http://community.actinic.com/attachment.php?attachmentid=4971&d=1306492969
Click on little "+" sign next to "OPOS Control".
Click on little plus sign next to "LineDisplay"
http://community.actinic.com/attachment.php?attachmentid=4976&stc=1&d=1306495201
Double Click on "LIUST51"
In this window, select the follow options:
Port = Com 4
Country = US
Baud Rate = 9600
Tick the tick box "Used Logical Name" and type "unit1" as the Logical Name.
http://community.actinic.com/attachment.php?attachmentid=4977&stc=1&d=1306495201
Click "OK",
Click on little plus sign next to "CashDrawer"
Double Click on "DRWA1S"
http://community.actinic.com/attachment.php?attachmentid=4978&stc=1&d=1306495201
In this window, select the follow options:
Port = Com 1
Baud Rate = 9600
Tick the tick box "Used Logical Name" and type "unit1" as the Logical Name.
http://community.actinic.com/attachment.php?attachmentid=4979&stc=1&d=1306495567
Click "OK",
Click on little plus sign next to "POSPrinter"
Double Click on "TRSTA1S"
http://community.actinic.com/attachment.php?attachmentid=4980&stc=1&d=1306495639
In this window, select the follow options:
Printer Type = TRST-A0x
Port = Com 1
Baud Rate = 9600
Country = US
Paper Width = 80mm
Font Size = FontSize2
Font Type = FontA
Tick the tick box "Used Logical Name" and type "unit1" as the Logical Name.
http://community.actinic.com/attachment.php?attachmentid=4981&stc=1&d=1306495639
Click OK, then "OK" to close the program.
In Actinic EPOS, go to Setup | This till | "Printing" tab, and make sure the tick boxes "Epson OPOS avalible" and "Customer Display Active" is ticked and a message has been entered in "Customer Display Message".
The customer display, printer and cash drawer are now fully configured. To test it, open Actinic EPOS, go to “Setup” | and tick the “Training mode” tick box. You can now put a sale through to test the hardware.
Remember to turn off training mode when you have finished testing the hardware
Please see below instructions to configure the Toshiba ST-B10 to work with Actinic EPOS.
If you find that the printer, pole display or cash drawer stop working on the Toshiba ST-B10 for any reason, these instructions will show you how to configure the Toshiba ST-B10 from the beginning and solve the problem.
To Configure the Customer Display, Printer and Cash Drawer
Go to Start | Control Panel | Add/remove programs.
Click on "ST-B10 OPOS", then click "remove", then select "yes" to unistall the program.
http://community.actinic.com/attachment.php?attachmentid=4974&stc=1&d=1306494937
Restart you PC (Start | Shut down | Restart)
Now you need to reinstall the drivers.
Double click on "My Computer", then browse to the following location:
C:\Drivers\POSDRV\OPOS
Double click on "ST-B10_OPOS_Installer_V001.902.exe"
Select "Next"
Select "Execute" and click "Next".
http://community.actinic.com/attachment.php?attachmentid=4975&stc=1&d=1306494937
Click "Next", then "Install", then finally "Finish".
Go to Start | Settings | Control Panel | Tec POS Drivers.
http://community.actinic.com/attachment.php?attachmentid=4971&d=1306492969
Click on little "+" sign next to "OPOS Control".
Click on little plus sign next to "LineDisplay"
http://community.actinic.com/attachment.php?attachmentid=4976&stc=1&d=1306495201
Double Click on "LIUST51"
In this window, select the follow options:
Port = Com 4
Country = US
Baud Rate = 9600
Tick the tick box "Used Logical Name" and type "unit1" as the Logical Name.
http://community.actinic.com/attachment.php?attachmentid=4977&stc=1&d=1306495201
Click "OK",
Click on little plus sign next to "CashDrawer"
Double Click on "DRWA1S"
http://community.actinic.com/attachment.php?attachmentid=4978&stc=1&d=1306495201
In this window, select the follow options:
Port = Com 1
Baud Rate = 9600
Tick the tick box "Used Logical Name" and type "unit1" as the Logical Name.
http://community.actinic.com/attachment.php?attachmentid=4979&stc=1&d=1306495567
Click "OK",
Click on little plus sign next to "POSPrinter"
Double Click on "TRSTA1S"
http://community.actinic.com/attachment.php?attachmentid=4980&stc=1&d=1306495639
In this window, select the follow options:
Printer Type = TRST-A0x
Port = Com 1
Baud Rate = 9600
Country = US
Paper Width = 80mm
Font Size = FontSize2
Font Type = FontA
Tick the tick box "Used Logical Name" and type "unit1" as the Logical Name.
http://community.actinic.com/attachment.php?attachmentid=4981&stc=1&d=1306495639
Click OK, then "OK" to close the program.
In Actinic EPOS, go to Setup | This till | "Printing" tab, and make sure the tick boxes "Epson OPOS avalible" and "Customer Display Active" is ticked and a message has been entered in "Customer Display Message".
The customer display, printer and cash drawer are now fully configured. To test it, open Actinic EPOS, go to “Setup” | and tick the “Training mode” tick box. You can now put a sale through to test the hardware.
Remember to turn off training mode when you have finished testing the hardware